ZRsuns 200/300W CO2 laser power supply for CO3 knife mold machine

ZR-200/300W CO2 Laser Power Supplies
Feature
 1. The 200W power supplies have good compatibility : This 200W power supplies can match with RECI,Yongli,SPT,EFR,Weiju and other brand 200W CO2 tube,besides this feature, the 200W power supplies also have strong adaptability and fast response, engraving or cutting benefits good effect.
2.This analog signal power supplies use ordinary H/L/P/G/IN/5V interface to receive control signal. It adopts aluminum upper cover and base, and galvanized plate casing.on this analog signal power supplies.
3.This analog signal power supplies have easy control: The analog signal power supplies use high or low level for control. The use of TTL-level control can realize start and stop quickly. At the same time the analog signal power supplies have a protection switch, testing is made by external water and ventilation 
4.This folding CO2 tube power supplies have stable working performance: Each folding CO2 tube power supplies have been much more testing procedures and under full load high temperature (52~55 degrees celsius) 24 hours of aging, which ensure the stability of each folding CO2 tube power supplies.
5.The folding CO2 tube power supplies have good protection feature: The folding CO2 tube power supplies have open circuit protection to make this folding CO2 tube power supplies work for a short time in the open state, so as to make it avoid the laser tube broken.
6.This 200W power supplies use 4PCS high quality flybacks/transformers which can make sure the 200W power supplies has stable voltage and current output to the load.
7.The  laser power control is simple, the 200W power supplies can use 0-5V analog signal or PWM signal for laser power control.