ST332B ADSL2plus Tester

ST332B ADSL2+ Tester

ST332B ADSL2+ Tester is an ideal tool for
ADSL/ADSL2+ network installation, maintenance
And faults elimination. It is simple, efficient,
Reliable and economic. Fixing &maintenance staff's best choice!

Functions

<1>DSL Physical layer test

<2>Modem Emulation (Replace the user Modem completely)

<3>PPPoE/PPPoA dial

<4>DMM Test

<5>Ping Function (WAN & LAN)

<6>Data memory capacity: 50 records

<7>Data upload to computer by RS232 core and software management

<8>Setup system parameter: Backlight time, shut off automatically time without operation, press tone, revise PPPoE/PPPoA dial attribute, user name and password, restore factory value and so on.

<9>Check dangerous voltage

<10>Four grades service judge
(Excellent, Good, Ok, Poor)
<11>Telephone functions, can detect incoming call, built-in earphone and microphone (optional)

Specifications

<1>ADSL2+
Standards
ITU G. 992.1(G. Dmt)
ITU G. 992.2(G. Lite)
ITU G. 994.1(G. Hs)
ANSI T1.413 issue #2,
ITU G. 992.5(ADSL2+)Annex L

Up channel rate 0~1.2Mbps

Down channel rate 0~24Mbps

Up/Down attenuation0~63.5dB

Up/Down noise margin0~32dB

Output power0~31.5dBm

Error test CRC, FEC, HEC, NCD, LOS

Display DSL connect mode Available

Display channel bit map Available

<2>ADSL
Standards
ITU G. 992.1 (G. Dmt)
ITU G. 992.2(G. Lite)
ITU G. 994.1(G. Hs)
ANSI T1.413 Issue # 2

Up channel rate 0~1Mbps

Down channel rate 0~8Mbps

Up/Down attenuation0~63.5dB

Up/Down noise margin0~32dB

Output power0~31.5dBm

Error test CRC, FEC, HEC, NCD, LOS
Display DSL connect mode Available
Display channel bit map Available

<3>DMM Test

AC Voltage 0 to 400 V

DC Voltage 0 to 290 V

Capacitance 0 to 1000nF

Loop Resistance 0 to 20K

Insulation Resistance0 to 50M


<4>General Specification

Power supplyInternal Rechargeable 2800mAH Li-ion battery


Battery Duration 4 to 5 hours

Working temperature10-50 oC

Working moisture 5%-90%

Dimensions180mm*93mm*48mm

Weight <0.5kg