SFP 1.25G Tx1310/Rx1550 40Km LC Transceiver

Gearlink’s GCS5L0C35 SFP transceiver is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1310nm FP laser (the 1550nm DFB laser), and the PIN/TIA. The module data link up to 40km in 9/125um Single-mode fiber.

This transceiver meets the Small Form Pluggable (SFP) industry-standard package utilizing an integral LC-Bi-directional optical and bidirectional sfp interface connector. An enhanced Digital Diagnostic Monitoring Interface compliant with SFF-8472 has been incorporated into the transceiver. It allows real-time access to the transceiver operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power, and transceiver supply voltage by reading a built-in memory with an I°C interface.

The optical output can be disabled by an LVTTL logic high-level input of Tx Disable, and the system also can disable the module via I°C. Tx Fault is provided to indicate the degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of the receiver or the link status with the partner. The system can also get the LOS (or Link)/Disable/Fault information via I°C register access.

Get Free Quote
Compatibility of SFP 1.25G Tx1310/Rx1550 40Km LC Transceiver
Cisco
Juniper
GLC-BX40-U-I 1000BASE-BX40-U TX:1310nm/RX:1550nm 40km SFP

Technical Specification Of SFP 1.25G Tx1310/Rx1550 40Km LC Transceiver

General Specifications
Parameter Symbol Min Typ. Max Unit
Bit Rate BR 1.25 Gb/sec
Max.Supported Link Length Max 40 km

Absolute Maximum Ratings
Parameter Symbol Min Typ. Max Unit Ref.
Storage Temperature TS -40 85 ºC
Storage Ambient Humidity HA 5 95 %
Power Supply Voltage VCC -0.5 4 V
Signal Input Voltage -0.3 Vcc+0.3 V
Receiver Damage Threshold +3 dBm
Lead Soldering Temperature/Time Told 260/10 ºC/sec Note 1
Lead Soldering Temperature/Time Told 360/10 ºC/sec Note 2

Notes:

1. Suitable for wave soldering.

2. Only for soldering by iron.

Parameter Of SFP 1.25G Tx1310/Rx1550 40Km LC Transceiver
Bidirectional EX-SFP-GE40KT13R15
Technical Documents Of SFP 1.25G Tx1310/Rx1550 40Km LC Transceivers

SFP 1.25G Tx1310/Rx1550 40Km LC Transceiver Pdf

Related 1.25G SFP Transceiver Products
SFP 10/100/1000Base-TRJ45 Transceiver SFP 10/100/1000Base-TRJ45 Transceiver More
SFP 1.25G Tx1310/Rx1550 10Km LC Transceiver SFP 1.25G Tx1310/Rx1550 10Km LC Transceiver More
SFP 1.25G Tx1550/Rx1310 40Km LC Transceiver

As one of fiber transceiver manufacturers, we have types of related products for sale, if you have needs, please contact us.