SDS-1835 0.18-0.35mm Diameter 13¯1mm Length Copper Micro Steel Fiber

UHPC  is a new type of cement composite material with good mechanical properties, good durability and good volume stability. Compared with traditional reinforced concrete structures, UHPC structure life can be doubled.

The Specification of SDS-1835 0.18mm-0.35mm Diameter 13¯1mm Length Copper Micro Steel Fiber
Name SD-1835
Appearance Copper coated
Diameter 0.18-0.35mm
Length 13¯1mm
L/D(length/diameter) 37-72
Tensile strength >2850Mpa
Application UHPC&RPC

The Advantages of SDS-1835 0.18mm-0.35mm Diameter 13¯1mm micro copper Steel Fiber
Good dispersion in concrete;
Less impact on UHPC liquidity;
Improving the toughness of concrete;
The brass fibers provides good impact, fatigue, shrinkage control and ductility in all grade concretes;

USER'S GUIDANCE
Dosage: depend on the application and minimum dosage is 120kg/㎥-200kg/㎥
Mixing: When pouring sand and aggregates into the hopper, mix an appropriate amount of loose steel fibers evenly, and then add cement. Put it in a mixing table, dry and mix for 2 minutes. If it is glued in rows of steel fibers, you need to add steel fibers after adding water so that the water can dissolve the bonding glue.
Put the evenly mixed fiber concrete into the conveyor and transport.
Concrete pouring and laying should be compacted.

The Safety & Packaging of SDS-01835 0.18-0.35mm Diameter 13¯1mm Length Micro Steel Fiber
Star Smith is a professional steel fiber manufacturer that can offer a wide range of hooked end steel fiber that meets different needs.
Packaging: 20kg per bag/carton or as your requirements, there are 50 bags or 1000kg in a pallet, 24tons per 20'container.
And the pallets should be waterproof, don't stack pallets on top of each other.
Gloves and eye protection should be used when adding the steel fibers.

If you are looking for a reliable steel fiber supplier, don't hesitate to contact us!