S600 Fiber and Copper Multi Tester

Specifications
xDSL Index
xDSL test main functions Physical Layer Info
PPPoP Dial
FTP Client, Fixative IP
Network Layer Test
Modem Emulation
PING
Support VLAN,HLOG,QLN
Error Code Statistics
Bit Graph Display
BPT /SNR Data
Modem Parameter Setting(VPI/VCI)
ADSL Index
Standards ITU G.994.1 (G.hs), ITU G.992.5, ITU G.992.5 Annex L. The max distance which can be connected is 6.5km. Be compatible with ADSL, ADSL2 and READSL.
Attenuation: 0~63.5dB
Noise margin 0~32dB
Upstream Channel Rate (interweaved / fast mode) 0~1.2Mbps
Downstream Channel Rate (interweaved / fast mode) 0~24Mbps
The modulating bits in the DMT sub-channel 0~15 and each sub-channels' frequency points
The number of error codes CRC, HEC, FEC, NCD, OCD
Other Parameters The output power of DSL
It can display every condition of the DSL line: lost signal and shutdown of link
VDSL2 Index
Standards ITU G.993.2(VDSL2).Be compatible with ADSL2+, ADSL standard.
Upstream Channel Rate (interweaved / fast mode) 0-100M
Downstream Channel Rate (interweaved / fast mode) 0-100M
The modulating bits in the DMT sub-channel 0~15 and each sub-channels' frequency points
The number of error codes CRC, HEC, FEC, NCD, OCD
Other Parameters The output power of DSL
It can display every condition of the DSL line: lost signal and shutdown of link
DSLAM information
Error seconds
INP pulse protection
SNR channel figure
Channel noise margin figure
Support profiles: Profile 8a, 8b, 8c, 8d, 12a, 12b, 17a
DMM Test Index
DC Voltage -400 to 400 V; Resolution: 0.1V
AC Voltage 0 to 290 V
Capacitance 0 to 1000nF; Accuracy: 0-10nF: ¯2nF, 10nF-1000nF: ¯2 %¯2nF
Loop Resistance 0 to 20KΩ; Accuracy: 0-100: ¯3%¯4Ω, 100-500: ¯3%, 500-20 KΩ: ¯2%
Insulation Resistance 0 to 50MΩ; Accuracy: 0-1.0M: ¯0.1 MΩ, 1.0-30M: ¯10%¯0.5 MΩ
TDR Index
General specifications Check line mix and break fault.
Auto and manual distance test
Test Range 8km(4km,16km,32km is optional)
Highest resolution 1km
Dead Zone 0m
Power consumption 1W
VOP Adjusting range 100-300 m/us
Distance test accuracy ≤1m
Pulse test voltage range ≥30V
Cable Tracking Index
Test cable type Network cable, twisted pair cable, telephone line, USB cable, coaxial cable.
Line status test Determine open or short circuit
Voltage polarity detection Positive and negative of DC voltage
Distance of signal transmission No less than 3km
DC Voltage No more than 48V
Check Line Sequence Index
Function Support generate network line signal to view the network check line sequence with the receiver
Feature Easy to operate: determine the line sequence by receiving side lights order
Optical Power Index
Wavelength range(nm) 800~1700
Photosensing material InGaAs
Power test range(dBm) -70~+10 or -50~+26
Error range ¯5%
Display distinguishability Linear display: 0.1%;logarithmic display: 0.01 dBm
Adapters FC, ST, SC
VFL Index
VFL FP-LD
Wavelength 650nm¯20nm
Output power 1mw/3mw/5mw/10mw (optional）
Connector 2.5mm universal adapter(SC, FC, ST)
Working mode CW or 2Hz modulation
Applicable fiber SM / MM