Resilient Gate Valve with Magnetic Lock

Basic information of Resilient Gate Valve with Magnetic Lock

This valve is installed in various pipelines and used as a two-way closed circuit device. A magnetic lock mechanism is added to the dark stem gate valve.

Dof960 series of cases

Features of Resilient Gate with Magnetic water valve lock

1.Reasonable construction, with all the advantages of  resilient  gate valve;
2. Only the special hand wheel or handle can be operated, which can effectively prevent the operation of the valve by non-management personnel;
3. The magnetic enclosure is effective against magnetization and durable;
4. Multiple valves can use a magnetic key for easy operation.

Principle of Resilient Gate Valve with Magnetic Lock

After the magnetic block inside the magnetic locking mechanism is matched with the magnetic block inside the magnetic handwheel or handle, the valve rod and the handwheel will rotate and drive the valve to open or close. When the magnetic block inside the magnetic mechanism is not matched, the handwheel will idle, causing no effect on the valve switch.

Installation and Commissioning of Resilient Gate Valve with Magnetic Lock

This valve can be equipped with a single hand wheel or handle, or more than one hand wheel or handle, depending on the operating condition. For specific use, please consult ZECO Valve Group.


Part Material Standard
Body/Bonnet Ductile Iron EN 1563/DIN 1693
Stem Stainless Steel 431 EN10088-1/ASTM A959
Wedge Ductile Iron + EPDM / NBR EN 1563/ISO 4633
Nut CuZn39Pb1 / C37000 EN12167/ASTM B135
Handwheel Ductile Iron+Magnetic Blocks EN 1563/DIN 1693
Magnetic Lock Stainless Steel 431+Magnetic Blocks EN10088-1/ASTM A959
For the materials options not listed, consult factory.
ZECO manufactures valves in more than 50 different alloys.

Product scope, Standards & Materials of Resilient Gate Valve with Magnetic Lock

Size Range: 2"~12"
Pressure Rating: 10bar ~ 25bar
Face to Face Dimensions: AMSE B16.10, EN558-1
Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2
Coating: Fusion Bonded Epoxy Coating
Inspection and Test: ISO 5208 / EN 12226-2


Zhengfeng Valve Group Co., Ltd. is a professional butterfly valve china manufacturer. We provide Control Valve, water valve locking device, Balancing Valve, china flow control valve, prv station fire fighting, butterfly valve and so on. Want to know more? Please contact us.