Gsm temperature controller ATC60A gprs rtu data logger

Gsm temperature controller ATC60A gprs rtu data logger

The Q26_RTU GSM/GPRS/EDGE Remote Monitoring& Remote Control System is a complete Remote Telemetry unit. It contains a GSM/GPRS/EDGE Modem and

control circuitry. It is capable of controlling up to 2 Relay outputs and monitor 2 Digital inputs and 2 Analogue inputs.(Analogue input support: Detect Water leaks,
Monitoring Temperatures for out-of-range conditions, Monitor Humidity for Damaging High Humidity Levels and monitor fuel levels).

The Q26_RTU GSM/GPRS/EDGE Remote Monitor &Remote Control System is operated by the sending of SMS and GPRS/EDGE. The GSM/GPRS/EDGE controller
can be used as a remote telemetry system; users can directly control the output relays from a simple text message or GPRS. The controller can also be used as a
remote monitoring system; the unit can automatically notify the user whenever the any inputs change state and inputs counter.
The Q26_RTU is complete with extend function include DI/DO/AI by UART2, support back up battery and built-in Quad-Band Modem -900/1800/850/1900.



Features

1) Monitors up to 2 Digital inputs&2 Analogue inputs
2) 2 Remote control outputs for switching applications
3) Fast and easy installation
4) Low set up and running costs
5) No field programming required as it can be done by SMS
6) Able to work in GMS mode/GPRS mode/EDGE mode
7) Programmable low/high alarm points for each analogue input
8) Works with 4 - 20mA(default)/1-5V based transducer
9) Accept other kind of transducer - temperature /motion transducer etc.

10) Reports on set point alarms and other triggers
11) Up to 10 alarm time set point
12) Support for get GPS location



Characteristic



Q26_RTU is a versatile SMS alert device suited for most monitoring needs. It is
simple to use yet is packed with powerful functionalities to meet a wide ranging
industrial and commercial and residential applications
Standalone Operation
It is very easy to setup, install and use. User can set parameter by Remote or
Local mode. We can provide local configure tool and Remote configure command for SMS



2 Digital Inputs

Most equipment today does provide some form of alerting signal to interface tomonitoring devices from reporting of various

malfunction or abnormalities. Thereare various kinds of signal that the equipment can send out, most common of which are

opening or closures of one or more switch relay contact.UPS usually provide signals such as incoming power fail, battery mode,

battery level low, and switchoverfailure. An air conditioner system may provide signals such as system on/off,compressor over

temperature, low gas pressures, etc.



Equipments to be monitored are connected to Q26_RTU using these alarm signaling contacts. Q26_RTU keeps a constant watch

over all the contacts. Whenever any contact input changes status (either from a close to open or from an open state to close state)

it is captured by Q26_RTU. It will then process the input according to the configuration provided by the user before. The correct SMS

messages will be sent to 5 mobile phone users.



Q26_RTU is so fast in capturing the change of status of any signaling contacts that no event will be missed out up to 2 inputs can be

monitored directly. The flexibility of Q26_RTU is in allowing remote query of input status and input counter using SMS.



To change contacting mobile phone number is also very easy. Authorize personal remotely using SMS command to add, change or

delete mobile phone number in Q26_RTU.



2 Analogue Inputs

The Q26_RTU has 2 analogue inputs that can be configured to measure a 4-20mA or 1-5VDC signal. It will generate reports

when the monitored signal reached to programmable set points.

Two programmable set points can be programmed for each analogue input.When the monitored signal crosses a set point a specified

action will be performed like switching the output relay or sending an SMS report.