Gigabit POE media converter

Key Features

10/100/1000Base-TX UTP to 1000Base-FX fiber media convertion.
IEEE802.3af PoE PSE compatible.
9K bytes packet at cut-through mode
Built-in AC/DC power supply.
Over-current protection.
choice of SC, BiDi or other connectors for multimode and singlemode.
DIP switch to set different configurations.
LFP (Link Fault Pass-through) support
FR220 series is a 10/100/1000Base-TX to 1000Base-FX (also can be forced to 100Base-FX) media converter, which allows two types of network segment to be connected easily. Complied with IEEE802.3af standard, the AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data transfered over a fiber optic link with 48V (or other voltage) power supply, providing power to IEEE802.3af powered device (PD) over CAT5 UTP cable (cable length up to 100meters / 330feets). The converter includes a single port PSE controller, which offers PD signature sensing and power monitoring features. Other features include over-current protection, LFP function. The LFP (Link Fauit Pass-through) allows the media converter to monitor both the fiber and copper RX port for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault.

Technical Specifications:

Data Rates:
- 10/100/1000Mbps
(IEEE802.3U IEEE802.3z 1000Base-Tx)
- 1000Mbps (1000Base-FX) or
100Mbps (100Base-FX)

Input Power Requirements:
- Input voltage ........................... 100 VAC to 240 VAC
- Input frequency ................................. 47 Hz to 63 Hz

Power over Ethernet Output:
- Pin Assignment and Polarity……1/2 (V+),3/6 (V-)
or/and 4/5(V+),7/8 (V-)
- Output Power…..please refer to ordering information
- Efficiency ....................................................75% min
- Short circuit protection........................ auto recovery
- Over current protection ....................... auto recovery

nvironmental Conditions:
- Operating temperature ....................... 0℃ to 50℃
- Cooling ........................................ free air convection
- Storage temperature ...................... -20℃ to +85℃
- Operating Humidity …… 90% max, non-condensing

Mechanical Specifications:
- Case Material……………Iron
- Case Color………………………………….Black
- Net Weight…………………….550g approx. / unit
- Dimensions………110(W) x 40(H) x 140(L) (mm)
Do not include transceiver length

Connectors:
- AC Inlet…………IEC-J-4
- LAN………………Shielded RJ-45
- Fiber………………see ordering information

Ordering Information:

Part Number
Supported Standard
Output Voltage
Output Current
Output Power
Remark

FR220S-XX-XXX
IEEE 802.3af
48V
0.35A max
15.4W max
default

FR220-XX-XXX
IEEE 802.3af
48V
0.54A max
25W max
default

FR 220A -XX-XXX
IEEE 802.3af
56V
0.54A max
30W max
optional

FR220B-XX-XXX
Non-standard
48V
0.60A max
30W max
optional

FR 220C -XX-XXX
Non-standard
24V
1.20A max
30W max
optional


*XX-XXX: supports optic connector / fiber type and distance. For more details, please refer to the list below or contact us.

Suffix
Description
Suffix
Description

SC-M005
SC, Multi-Mode, 550m , 850nm
BS3-S10
BiDi SC , Single-Mode, 10km , 1310/1550nm

SC-S10
SC, Single-Mode, 10km , 1310nm
BS3-S20
BiDi SC , Single-Mode, 20km , 1310/1550nm

SC-S20
SC, Single-Mode, 20km , 1310nm
BS3-S40
BiDi SC , Single-Mode, 40km , 1310/1550nm

SC-S40
SC, Single-Mode, 40km , 1310nm
BS5-S10
BiDi SC , Single-Mode, 10km , 1550/1310nm

SC-S60
SC, Single-Mode, 60km , 1550nm
BS5-S20
BiDi SC , Single-Mode, 20km , 1550/1310nm



BS5-S40
BiDi SC , Single-Mode, 40km , 1550/1310nm