Drain leak pressure testing stirrup pump

The K&S stirrup pump offers a simple to use all in one drain and pipe pressure testing alternative to the conventional kit available on the market.
The generally available kit is lots of bits of pipes and fittings and a very small hand pump, along with a manometer which takes time to assemble, is expensive and easily broken or lost.
Our stirrup pump comes complete. All you have to do is connect to the plugged ends of the pipe run and pump it up and close off the ball valve.
The kit comes with standard ½” BSP Brass connector to test all plugs up to 6” and a 1” BSP adaptor for plugs over 6” diameter pipes. The stirrup pump is high pressure with a non return valve as well as the close off ball valve for use when testing.
We have specially commissioned our own liquid filled pressure gauge to ensure a reliable product with This gauge is easy to read and is marked with both PSI and MPa. Pipe test pressures are quite low from a maximum of around 32psi for 1 ½” diameter pipes to around 7psi for pipes of 8” and above.
Each kit comes with instructions for use.