Dirt Separator

Basic information of Magnetic Dirt Separator
This valve is used for water purification
Features of Dirt Separator
1.Easy to operate；
2. No water stop is required to clean the cavity body；
3. Dirt above 0.005 millimeters can be removed, and can absorb rust；
4. The large volume of waste collecting chamber can reduce the number of cleaning.
Principle of Dirt Separator
The center of the valve uses a unique structure of the filter core, this specially designed component is most suitable for the separation of dirt, and to minimize pressure loss. When cleaning up the sewage regularly, the magnetic bar can be drawn out first so that the iron-containing sewage is adsorbed to the bottom, and then open the discharge valve to discharge the collected sewage. 
Installation and Commissioning of Dirt Separator
The gate valve should be installed before this valve for maintenance. The bottom of the installation shall be provided with a discharge port for discharging. For specific use, please consult ZECO Valve Group.
Part Material Standard
Body WCB ASTM A216
Bonnet WCB ASTM A216
Bolts/Nuts Stainless Steel 431 EN10088-1/ASTM A959
Seal EPDM / NBR ISO 4633
Filter PPO ISO 4633
Magnetic Device CuZn39Pb1 /Stainless Steel 431 EN12167/EN10088-1
For the materials options not listed, consult factory.
ZECO manufactures valves in more than 50 different alloys.
Product scope, Standards & Materials of Dirt Separator
Size Range: 2"~40"
Pressure Rating: 10bar ~ 25bar
Face to Face Dimensions: AMSE B16.10, EN558-1
Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2
Coating: Fusion Bonded Epoxy Coating
Inspection and Test: ISO 5208 / EN 12226-2
ZECO is a professional china check valve manufacturers, we provide check valve, gate valve, butterfly valve, control valve, water valve and etc. Want to know air dirt separator maintenance or more, please contact us.