Control Valve for Mixed Bed Water Treatment Systems 15702

Control Valve, Valve
Control Valve for Mixed Bed Water Treatment Systems 15702
Product Characteristics:
1.If power is cut off in the service status, the system will directly go to fast rinse after power on, which can prevent flow-out of unqualified water.
2.When conductivity of outlet is qualified within one minute, system start service. In service state, if conductivity of outlet is unqualified within 20 seconds, system start regeneration.
3.Entering or washing acid and alkali at the same time which reduces regeneration time.
Realize first grade or second grade demineralized water regeneration.
4.The output connector of pure water pump can control regeneration pump (adopt second grade demineralized water regeneration).
5.one in service one standby termina.
Range of Application:
The Mixed Bed System usually is installed behind the electrodialyzer or RO device ( or directly applied to the water with low saltness), proceeding subtly desalt and making up high purity water.It is widely used in the electronics industry,chemical industry,pharmac-euticals industry ,atomic energy and power industry,etc.
Working Principle:
Use one valve instead of few valves in the mixed bed of water treatment system, gather the control pipe of the top and bottom strainer and valve in one valve. Each state controlled by the one valve combine with five ball valves to realize service (making up high purity water), backwash, settling, alkaline drawing, acid-alkaline rinse, drainage, mixing, rapid rinse, fast rinse cycles.