Air conditioner

We manufacturers of air conditioners. Our products are with the following features:

1.Three-leakage testing on our air conditioners. Firstly there is a water checking on the evaporators and condensers which will be installed in our units.Secondly, helium-leakage inspection. We charge helium in our unit and check the sealed refrigerant running tubing system.Thirdly, runing test of the whole set of air conditioners. That is in order to see the operation of our products. Despite this checking, our QC Department will randomly take out some pieces from each batch of products and inspect them.

2.Three bended evaporater. The traditional air cons only have an one bend evaportator.But the model I recommend here has three bended one, so the heat exchanging area is larger.

3.All the copper tube of evaporaters are inner-grooved copper tubes. It in an other way helps enlarge the heat exchanging area.Together with point two, it raises the heat exchanging efficiency of the whole unit so as to waste less electric power.

4.More scientific air circulation design. The room air is sucked in from the upper part of the indoor unit, and the after-handled air let out from the bottom. It makes the air circulate in a big cycle. This will avoid the problem of the normal air conditioners that the after-handled air will be sucked in immediately from the front. This problem leads to the waste of energy. Our new design of this just help solving this problem.It can cool the room faster,too.

Contact us:
Wesley Hu
Tel: +86 760 2263110
Fax: +86 760 2279482
E-mail: [email protected]