10G sfp+ to sfp+ converter

MAIN APPLICATIONS

Connection between fiber to fiber 10Gbps Ethernet equipment function as fiber mode converter ,or as fiber repeater for long distance transmission.
Media converter for network backbone(SAN, LAN, MAN).
Can be applied in Telecommunication room, R&D laboratory, Data center, and etc.
1310nm /1550nm/CWDM/DWDM Optical Wavelength Conversion.

KEY Feature：

3R Repeater
Support Jumbo Frame
Transparent Transport and very low delay
Support ITUT prescribed DWDM/CWDM wavelength
Support DMI function for SFP+/XFP fiber module
Support PRBS31 Pattern Generator and Checker function
Support Loopback test function
Economic In-band Management function
Powerful Network Management function（Web，SNMP，Console）
Support hot plugging
Support 2U Rack (16 channel) and standalone use
Full State Led display
Easy installation
Technical Information:

Performance Data
Technical Indexes

Equipment function
3R Repeater

Transmission Speed
10Gb/s （ 9.95Gb/s-11.35Gb/s ）

Protocols
IEEE802.3ae (10Gbase-R/LRM)

Access Type
10G LAN/ 10G WAN

Interface Type
A Type: SFP+ To/From SFP+

B Type: SFP+ To/From XFP

C Type: XFP To/From XFP

Transmission Distance
SFP+ module: Up to 40Km

XFP module: Up to 80Km

Maximum Packet

Forwarding Rate
14,880,950/S

Network management

information:
• Card type information

• SFP+ or XFP fiber module detection

• SFP+ or XFP fiber module DMI function （ Temperature 、 Voltage 、 Optical power ）

• Link status detector

• Enable/Disabled Loopback test function

• Enable/Disable PRBS Generator and checker function

• Rate select （ 10Gbase-Lan or Wan ）

• Remote card's status monitor （ only in pairs ）

power requirement
Rack-mountable : AC 85 ～ 220V OR DC -48V

Standalone: AC 220V OR -48V

Power consumption: ≤4W

Work Environment
Operating Temp: 0~ 50 ℃

Storage Temp: -10~ 70 ℃

Humidity: 5%~90% （ non-condensing ）

Dimension
Card ： 11.5mm （ W ） × 78mm （ D ）

Standalone ： 156mm （ W ） × 128mm （ D ） × 32mm （ H